winamp/Src/nprt_plugin/gecko/1.8/win/idl/nsIPrefBranch.idl

/* -*- Mode: IDL; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* ***** BEGIN LICENSE BLOCK *****
 * Version: NPL 1.1/GPL 2.0/LGPL 2.1
 *
 * The contents of this file are subject to the Netscape Public License
 * Version 1.1 (the "License"); you may not use this file except in
 * compliance with the License. You may obtain a copy of the License at
 * http://www.mozilla.org/NPL/
 *
 * Software distributed under the License is distributed on an "AS IS" basis,
 * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
 * for the specific language governing rights and limitations under the
 * License.
 *
 * The Original Code is Mozilla Communicator client code.
 *
 * The Initial Developer of the Original Code is 
 * Netscape Communications Corporation.
 * Portions created by the Initial Developer are Copyright (C) 1998
 * the Initial Developer. All Rights Reserved.
 *
 * Contributor(s):
 * Alec Flett <[email protected]>
 * Brian Nesse <[email protected]>
 *
 * Alternatively, the contents of this file may be used under the terms of
 * either the GNU General Public License Version 2 or later (the "GPL"), or 
 * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
 * in which case the provisions of the GPL or the LGPL are applicable instead
 * of those above. If you wish to allow use of your version of this file only
 * under the terms of either the GPL or the LGPL, and not to allow others to
 * use your version of this file under the terms of the NPL, indicate your
 * decision by deleting the provisions above and replace them with the notice
 * and other provisions required by the GPL or the LGPL. If you do not delete
 * the provisions above, a recipient may use your version of this file under
 * the terms of any one of the NPL, the GPL or the LGPL.
 *
 * ***** END LICENSE BLOCK ***** */

#include "nsISupports.idl"

/**
 * The nsIPrefBranch interface is used to manipulate the preferences data. This
 * object may be obtained from the preferences service (nsIPrefService) and
 * used to get and set default and/or user preferences across the application.
 *
 * This object is created with a "root" value which describes the base point in
 * the preferences "tree" from which this "branch" stems. Preferences are
 * accessed off of this root by using just the final portion of the preference.
 * For example, if this object is created with the root "browser.startup.",
 * the preferences "browser.startup.page", "browser.startup.homepage",
 * and "browser.startup.homepage_override" can be accessed by simply passing
 * "page", "homepage", or "homepage_override" to the various Get/Set methods.
 *
 * @see nsIPrefService
 * 
 * @status FROZEN
 */

[scriptable, uuid(56c35506-f14b-11d3-99d3-ddbfac2ccf65)]
interface nsIPrefBranch : nsISupports
{

  /**
   * Values describing the basic preference types.
   *
   * @see getPrefType
   */
  const long PREF_INVALID = 0;
  const long PREF_STRING = 32;
  const long PREF_INT = 64;
  const long PREF_BOOL = 128;

  /**
   * Called to get the root on which this branch is based, such as
   * "browser.startup."
   */
  readonly attribute string root;

  /**
   * Called to determine the type of a specific preference.
   *
   * @param aPrefName The preference to get the type of.
   *
   * @return long     A value representing the type of the preference. This
   *                  value will be PREF_STRING, PREF_INT, or PREF_BOOL.
   */
  long getPrefType(in string aPrefName);

  /**
   * Called to get the state of an individual boolean preference.
   *
   * @param aPrefName The boolean preference to get the state of.
   *
   * @return boolean  The value of the requested boolean preference.
   *
   * @see setBoolPref
   */
  boolean getBoolPref(in string aPrefName);

  /**
   * Called to set the state of an individual boolean preference.
   *
   * @param aPrefName The boolean preference to set the state of.
   * @param aValue    The boolean value to set the preference to.
   *
   * @return NS_OK The value was successfully set.
   * @return Other The value was not set or is the wrong type.
   *
   * @see getBoolPref
   */
  void setBoolPref(in string aPrefName, in long aValue);

  /**
   * Called to get the state of an individual string preference.
   *
   * @param aPrefName The string preference to retrieve.
   *
   * @return string   The value of the requested string preference.
   *
   * @see setCharPref
   */
  string getCharPref(in string aPrefName);

  /**
   * Called to set the state of an individual string preference.
   *
   * @param aPrefName The string preference to set.
   * @param aValue    The string value to set the preference to.
   *
   * @return NS_OK The value was successfully set.
   * @return Other The value was not set or is the wrong type.
   *
   * @see getCharPref
   */
  void setCharPref(in string aPrefName, in string aValue);

  /**
   * Called to get the state of an individual integer preference.
   *
   * @param aPrefName The integer preference to get the value of.
   *
   * @return long     The value of the requested integer preference.
   *
   * @see setIntPref
   */
  long getIntPref(in string aPrefName);

  /**
   * Called to set the state of an individual integer preference.
   *
   * @param aPrefName The integer preference to set the value of.
   * @param aValue    The integer value to set the preference to.
   *
   * @return NS_OK The value was successfully set.
   * @return Other The value was not set or is the wrong type.
   *
   * @see getIntPref
   */
  void setIntPref(in string aPrefName, in long aValue);

  /**
   * Called to get the state of an individual complex preference. A complex
   * preference is a preference which represents an XPCOM object that can not
   * be easily represented using a standard boolean, integer or string value.
   *
   * @param aPrefName The complex preference to get the value of.
   * @param aType     The XPCOM interface that this complex preference
   *                  represents. Interfaces currently supported are:
   *                    - nsILocalFile
   *                    - nsISupportsString (UniChar)
   *                    - nsIPrefLocalizedString (Localized UniChar)
   *                    - nsIFileSpec (deprecated - to be removed eventually)
   * @param aValue    The XPCOM object into which to the complex preference 
   *                  value should be retrieved.
   *
   * @return NS_OK The value was successfully retrieved.
   * @return Other The value does not exist or is the wrong type.
   *
   * @see setComplexValue
   */
  void getComplexValue(in string aPrefName, in nsIIDRef aType,
                       [iid_is(aType), retval] out nsQIResult aValue);

  /**
   * Called to set the state of an individual complex preference. A complex
   * preference is a preference which represents an XPCOM object that can not
   * be easily represented using a standard boolean, integer or string value.
   *
   * @param aPrefName The complex preference to set the value of.
   * @param aType     The XPCOM interface that this complex preference
   *                  represents. Interfaces currently supported are:
   *                    - nsILocalFile
   *                    - nsISupportsString (UniChar)
   *                    - nsIPrefLocalizedString (Localized UniChar)
   *                    - nsIFileSpec (deprecated - to be removed eventually)
   * @param aValue    The XPCOM object from which to set the complex preference 
   *                  value.
   *
   * @return NS_OK The value was successfully set.
   * @return Other The value was not set or is the wrong type.
   *
   * @see getComplexValue
   */
  void setComplexValue(in string aPrefName, in nsIIDRef aType, in nsISupports aValue);

  /**
   * Called to clear a user set value from a specific preference. This will, in
   * effect, reset the value to the default value. If no default value exists
   * the preference will cease to exist.
   *
   * @param aPrefName The preference to be cleared.
   *
   * @note
   * This method does nothing if this object is a default branch.
   *
   * @return NS_OK The user preference was successfully cleared.
   * @return Other The preference does not exist or have a user set value.
   */
  void clearUserPref(in string aPrefName);

  /**
   * Called to lock a specific preference. Locking a preference will cause the
   * preference service to always return the default value regardless of
   * whether there is a user set value or not.
   *
   * @param aPrefName The preference to be locked.
   *
   * @note
   * This method can be called on either a default or user branch but, in
   * effect, always operates on the default branch.
   *
   * @return NS_OK The preference was successfully locked.
   * @return Other The preference does not exist or an error occurred.
   *
   * @see unlockPref
   */
  void lockPref(in string aPrefName);

  /**
   * Called to check if a specific preference has a user value associated to
   * it.
   *
   * @param aPrefName The preference to be tested.
   *
   * @note
   * This method can be called on either a default or user branch but, in
   * effect, always operates on the user branch.
   *
   * @return boolean  true  The preference has a user set value.
   *                  false The preference only has a default value.
   */
  boolean prefHasUserValue(in string aPrefName);

  /**
   * Called to check if a specific preference is locked. If a preference is
   * locked calling its Get method will always return the default value.
   *
   * @param aPrefName The preference to be tested.
   *
   * @note
   * This method can be called on either a default or user branch but, in
   * effect, always operates on the default branch.
   *
   * @return boolean  true  The preference is locked.
   *                  false The preference is not locked.
   *
   * @see lockPref
   * @see unlockPref
   */
  boolean prefIsLocked(in string aPrefName);

  /**
   * Called to unlock a specific preference. Unlocking a previously locked 
   * preference allows the preference service to once again return the user set
   * value of the preference.
   *
   * @param aPrefName The preference to be unlocked.
   *
   * @note
   * This method can be called on either a default or user branch but, in
   * effect, always operates on the default branch.
   *
   * @return NS_OK The preference was successfully unlocked.
   * @return Other The preference does not exist or an error occurred.
   *
   * @see lockPref
   */
  void    unlockPref(in string aPrefName);


  /**
   * Called to remove all of the preferences referenced by this branch.
   *
   * @param aStartingAt The point on the branch at which to start the deleting
   *                    preferences. Pass in "" to remove all preferences
   *                    referenced by this branch.
   *
   * @note
   * This method can be called on either a default or user branch but, in
   * effect, always operates on both.
   *
   * @return NS_OK The preference(s) were successfully removed.
   * @return Other The preference(s) do not exist or an error occurred.
   */
  void deleteBranch(in string aStartingAt);

  /**
   * Returns an array of strings representing the child preferences of the
   * root of this branch.
   * 
   * @param aStartingAt The point on the branch at which to start enumerating
   *                    the child preferences. Pass in "" to enumerate all
   *                    preferences referenced by this branch.
   * @param aCount      Receives the number of elements in the array.
   * @param aChildArray Receives the array of child preferences.
   *
   * @note
   * This method can be called on either a default or user branch but, in
   * effect, always operates on both.
   *
   * @return NS_OK The preference list was successfully retrieved.
   * @return Other The preference(s) do not exist or an error occurred.
   */
  void getChildList(in string aStartingAt, out unsigned long aCount,
                    [array, size_is(aCount), retval] out string aChildArray);

  /**
   * Called to reset all of the preferences referenced by this branch to their
   * default values.
   *
   * @param aStartingAt The point on the branch at which to start the resetting
   *                    preferences to their default values. Pass in "" to
   *                    reset all preferences referenced by this branch.
   *
   * @note
   * This method can be called on either a default or user branch but, in
   * effect, always operates on the user branch.
   *
   * @return NS_OK The preference(s) were successfully reset.
   * @return Other The preference(s) do not exist or an error occurred.
   */
  void resetBranch(in string aStartingAt);

};


%{C++

#define NS_PREFBRANCH_CONTRACTID "@mozilla.org/preferencesbranch;1"
#define NS_PREFBRANCH_CLASSNAME "Preferences Branch"

%}